日韩三级在线_国产精品3区_亚洲精品a_成人网页_国产成人精品久久_国产精品国产精品国产专区不片

        1、培訓過程中，如有部分內容理解不透或消化不好，可免費在以后培訓班中重聽；
        2、培訓結束后,授課老師留給學員聯系方式,保障培訓效果,免費提供課后技術支持。
        3、培訓合格學員可享受免費推薦就業機會。

培訓方式以講課和實驗穿插進行。

PrimeTime SI: Crosstalk Delay and Noise

Overview
In the class you will learn the basic concepts of crosstalk, their effects on timing and noise, and how PrimeTime SI can be used to identify these effects. You will apply the PrimeTime SI flow and methodology for chip level crosstalk analysis. The labs will demonstrate the use of PrimeTime SI to analyze crosstalk failures on an actual design.

Best practice methodologies will give you the insights to drive the PrimeTime SI tool at its optimum performance and to generate quality results.

?
Hands-on labs follow each training module, allowing you to apply the skills learned in lecture.

?
Objectives?
At the end of this workshop the student should be able to:

·Run PTSI for crosstalk delay and noise analysis?
·Use the key reports in the shell and GUI to identify violations due to crosstalk and guide timing closuree?
·Define clock relationships for improved timing accuracy?
·Apply useful commands to catch and report incomplete inputs to PTSI?
·More finely control PTSI and your fixing tool using the following techniques Manually control delta delay and noise calculations for specific nets?
·Apply path-based analysis?
·Apply what-if analysis

?
Audience Profile
Design?or?Verification engineers who develop OpenVera testbenches using the Verification Methodology Manual based RVM classes

?
Prerequisites
Design?or?verification engineers who perform STA sign-off using PrimeTime.

?
Course Outline

·Run PrimeTime SI: Crosstalk Delay?
·Completing your Inputs for PTSI?
·Run PrimeTime SI: Crosstalk Noise?
·Introduction to Power Analysis

·Average Power Analysis

·Peak Power Analysis

·Clock Network Power Analysis

·Multivoltage Power Analysis

·mproving Accuracy?
·ECO Flows?

Unit 1

• Does your design meet timing ?
• Objects, Attributes, Collections
• Constraints in a timing report
• Timing arcs in a timing report
• Control which paths are reported

Unit 2

• Summary Reports
• Create a setup file and run script
• Validate a run script
• Getting to know your clocks

Unit 3

• Analysis types and back annotation
• Additional checks and constraints
• Conclusion